banner



How To Pair Billboard Wireless Headphones

billboard logo billboard BB1827 Wireless Headphone

Bombardment Data:
Born Battery: Lithium
Battery Capacity: 180 mAH
Music playing time: Upwards to 4 hours
Charging time: Up to two-iii hours
*Approximate playback time. Battery life depends on individual use and may exist slightly more or less than the time specified.

Bluetooth Information:
Bluetooth Specification: V5.0
Operating Distance: Upwardly to 33 anxiety (Course II)
Organisation Requirements: Bluetooth-capable device
Headphone Specifications:
Driver Unit Size: upto 40mm
Frequency Response: 20Hz-20KHz
Impedance: 32 Ω
Boosted Connexion Sources:
Power Source: Built-in rechargeable bombardment or via USB cable

Buttons & Functions

billboard BB1827 Wireless Headphone -fuctions

A. Play/Break, Answer/End Calls
B. Volume Up
C. Volume Down
D. Adjacent Track
E. Previous Runway
F. Power ON/OFF
K. LED indicator
H. Microphone
I. Micro USB charging port
J. Charging Cable

Charging the Headphones

  1. Plug the micro USB cablevision into the micro USB port on the headphones, and connect the other cease of the cablevision to either a computer USB port or to a USB-compatible car or wall charger.
  2. The LED light volition turn red during charging.
  3. When the battery is fully charged, the LED calorie-free volition turn off.
  4. Charging time is approximately 2-3 hours.
  5. Headphones will make a audio when the battery is low.

Turn On/Off

  • To ability on Slide the Power switch to the ON position. The LED lights will flash blue and red alternately.
  • To power off: Slide the Power switch to the OFF position.
  • If there is no device paired with the headphones, the headphones will go to free energy save mode or Turn off the headphones subsequently v minutes.

Connect with a new device

  1. Plough the headphones on, the LED calorie-free will flash blue and reddish.
  2. On your Bluetooth-enabled device to navigate to the Bluetooth settings, turn on the Bluetooth feature and search for new devices.
  3. After a few seconds, you lot will see its pairing name listed equally BB-BT-HP
  4. Tap the display proper noun to select it. The headphone volition have A Chinkle sound and the blue LED will flash every four seconds when it is successful pairing with your device.

If your device asks for a pin lawmaking, enter 0000 or 1234.

Wireless Audio Command

  1. One time you take connected to your Bluetooth® enabled device (refer to the "Bluetooth® Connect with a new device" section) open an sound app on your device, and press play.
  2. On the headphone controls: press the Volume Up push button to raise the book.
    Printing the Volume Down button to lower the volume.
    Press the Next Runway button to the adjacent rails.
    Press the Previous Rails button to the previous runway.
  3. You tin can pause and resume music playback by pressing the Play/Pause

Answer/End Calls

  1. When there is a call, press the Reply/End Calls (Play/Pause) button to After the phone call press the Answer/Terminate Calls button to hang up.
  2. When there is a phone call, long-printing the Answer/Terminate Calls(Play/Interruption) button for two seconds to refuse a call.
    ** If the other political party hangs up first, you practise not need to press the button.
  3. If you demand to redial the last number chosen, quickly press the Answer/Terminate Calls push twice.

billboard BB1827 Wireless Headphone - Symbol Information technology may damage your hearing if you listen with high book for a long time. It is recommended you use the lowest volume possible for listening to music and making phone calls.

Bombardment information

  • Your device is powered by a rechargeable bombardment. The total performance of a new battery is achieved only after two to three complete charge and belch cycles. The battery can be charged and discharged hundreds of times, but information technology will eventually vesture out.
  • Practise not go out a fully charged battery connected to a charger, overcharging may shorten its lifetime. If left unused, a fully charged battery volition lose its charge over time.
  • Never use any charger that is damaged.
  • Leaving the device in hot or cold places will reduce the chapters and lifetime of the battery. The optimal temperature for the battery is between xv°C and 25°C (59°F and 77°F ). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged.
  • Exercise not dispose of batteries in a fire equally they may explode. Batteries may also explode if damaged.
  • E'er dispose of batteries according to local regulations. Please recycle when possible. Practise not dispose of equally household waste.

Technical Support: [electronic mail protected] or call 212 883-8838
© 2021 Billboard IP Holdings, LLC. All rights reserved. Billboard®, the Billboard logo, HOT 100 and associated characters, trademarks and design elements are owned and licensed past Billboard IP Holdings, LLC.
Bluetooth®is a registered trademark of Bluetooth SIG.

Limited Warranty

ESI Cases and Accessories warrants to the first consumer purchaser that this product, when shipped in its original container to the original purchaser, will be free from lacking workmanship and materials for ane year and agrees that it will, at its option, either repair the defect or supplant the lacking product or part thereof at no charge to the purchaser for parts or labor for the time periods described.
This warranty does not use to any appearance items of the product nor to the additional excluded item(s) set forth beneath nor to whatsoever product the exterior of which has been damaged or defaced which has been subjected to misuse, aberrant service or treatment, or which has been altered or modified in design or construction. The limited warranty described herein is in improver to applicable law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND Fettle FOR Apply ARE Limited TO THE PERIOD FROM THE DATE OF ORIGINAL Purchase SET FORTH BELOW. Some states do non let limitations on how long an implied warranty lasts, then the higher up limitation may non employ to yous. Neither the sales personnel of the seller nor whatsoever other person is authorized to make whatever warranties other than those described herein or to extend the duration of any warranties beyond the time menses described herein on the behalf of ESI Cases and Accessories.
The warranties described herein shall exist the sole and exclusive warranties granted by ESI Cases and Accessories and shall be the sole and exclusive remedy available to the purchaser corrections of defects, in the style and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of ESI Cases and Accessories to the purchaser with respect to the product and shall constitute total satisfaction of all claims, whether based on contract negligence, strict liability or otherwise. In no event shall ESI Cases and Accessories be liable or in any way responsible, for whatsoever incidental or consequential economic or property impairment. Some states practice not allow the exclusion of incidental or consequential damages, and so the above exclusion may non utilise to you. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.
This warranty does not encompass cables that have become frayed, cracked, or broken from apply. The user should immediately replace this, or whatever, charge cable that has get frayed, cracked, or broken, every bit it may plant a serious safe hazard, including electrocution if it is continued to exist used.
Send device with the product to:
ESI Cases & Accessories
One Gateway Center, Suite 2600 Newark, NJ 07102
*Enclose proof of purchase and $11.95 for Shipping and Handling.

Continue THESE INSTRUCTIONS FOR Time to come REFERENCE

Your Wireless Headphones have an internal rechargeable bombardment. Improper usage may result in the Wireless Headphones becoming hot, ignite or burst and cause injury if exposed to conditions of abuse.
Exist sure to follow the safety warnings listed below:

  1. Do not disassemble, throw away or impairment the Wireless Headphones.
  2. Store the Wireless Headphones in a dry out identify, keeping it abroad from damp corrosive materials and environments such equally table salt air.
  3. Go on the Wireless Headphones away from direct sunlight, fire, and high voltage Exercise non store the Wireless Headphones within a car during hot atmospheric condition. Think a closed car acts as a greenhouse allowing the inside temperature to possibly achieve over 200F.
  4. The Wireless Headphones are not a toy. Please keep it out of the reach of immature children.
  5. Please practice not discard the Wireless Headphones. Consult your local waste material drove agency for proper disposal or recycling methods. You lot may likewise contact tall2Recycle"at 877-273-2925 or online at "call2recycle.org" for a battery recycling drop-off location almost you.billboard BB1827 Wireless Headphone - Recyle

Charging the battery

This device has an internal, rechargeable battery.

  1. Plug the charger cable into the Headphones.
  2. Connect the charger to a USB power source. The red indicator low-cal will display during charging. If charging does not start, disconnect the charger plug information technology in again, and retry. Charging the battery fully may have up to 2-3 hours.
  3. When the battery is fully charged, the red indicator light will turn off. Disconnect the charger from the USB Ability source and the Headphones. The fully charged battery has power for upwards to 3-4 hours of music time or up to 100 hours of standby However, the talk and standby times may vary when used with different devices, settings, and environments.

FCC Data
FCC ID:2AML6KR827

This device complies with Part 15 of the FCC rules. Operation is field of study to the following two conditions: (one) this device may not cause harmful interference, and (2) this device must accept whatsoever interference received; including interference that may crusade undesired operation. Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Course B digital device, pursuant to Function xv of the FCC rules. These limits are designed to provide reasonable protection confronting harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accord with the instructions, may crusade harmful interference to radio communications. However, there is no guarantee that interference volition not occur in a item installation.

If this equipment does cause harmful interference to radio or television reception, which can be adamant by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more than of the following measures:

  • Reorient or relocate the receiving equipment.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a excursion different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/Goggle box technician for help.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user dominance to operate the equipment. Tested to comply with FCC standards. FOR Domicile OR OFFICE USE.
This equipment complies with FCC RF radiations exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not exist co-located or in conjunction with whatsoever other antenna or transmitter.

Documents / Resources

Source: https://manuals.plus/billboard/bb1827-wireless-headphone-manual

0 Response to "How To Pair Billboard Wireless Headphones"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel